The Preformed Suspension Clamp is used to ADSS cable on the line support and connect immediate support or support of angle less than 25°, one set of each tower. The cilping strength 10%-20% RTS(Rated Tensile Strength), and the recommended span>200m.The Preformed Helical fittings include inner preformed armor rods, outer preformed rods, a suspension head (a pair of aluminium clamp, a pair of plastic inserts, a set of bolts, lock nuts, and lock washers etc.) Eye Chain Link, Anchor shackle.
Preformed Suspension Clamp Preformed Suspension Clamp,Preformed Cable Suspension Clamp,Preformed Suspension Clamp Tension Set,Preformed Aluminum Suspension Clamp,Preformed Suspension Clamp with Connectors Jiangsu Chuandu Electrical Technology Co.,Ltd. , http://www.cdepf.com
Bare Copper Conductor PE XLPE Insulated aluminium mylar tape Screen Galvanized steel wire Armoured Instrument Cable
Application                                                                              Â
For transmission of analogue and digital signals in instrument and control systems; use in zone 1 and zone 2 group
ΙΙ classified areas (IEC 60079 part 14). Not allowed for direct connection to low impedance source, e.g. the public
mains electricity supply.
Recommended for direct burial. For indoor and outdoor installation in dry and wet locations on racks, in conduits.
1. Conductor: Plain annealed copper, sizes: 0.5 mm² solid, 1.0 mm² solid, 0.5 mm² flexible, 0.75 mm² flexible or 1.5mm²         Â
                        stranded
2. Insulation: Polyethylene PE
Colour code: black / blue;
with numbered tape under separator tape of the pair screen
3. Pair screen: 24 µm aluminium / PETP tape over tinned copper drain wire, 0.5 mm²
4. Collective screen: 24 µm aluminium / PETP tape over tinned copper drain wire, 0.5 mm²
5. Bedding: polyethylene PE, black
6. Armour: galvanized round steel wires
7. Outer sheath: Polyvinyl chloride PVC, black
                             *Flame retardant
                             *Oil resistant,
                            *Anti-rodent&termite
These properties could be offered upon requested.
Technical Data                                                                    Â
 Temperature range:
-40°C up to +70°C (during operation)
- 5°C up to +50°C (during installation)
Min. bending radius:
8 x cable-Ø
Â
