Original Meanwell Lpv-60 Series Single Output Waterproof IP67 LED Driver

  • Model NO.: LPV-60
  • Output Type: DC
  • Color: White
  • Internal Structure: On-Off Type
  • Connection: Screw
  • Brand: Meanwell
  • Trademark: Meanwell
  • Specification: Universal
  • HS Code: 8504401400
  • Usage: Laptop, Switching, Mobile Phone, Game Player, Digital Camera, Phone, Display, LED Strip
  • Certification: TUV, RoHS, UL, ISO9001, CCC
  • Type: OEM
  • Power Source: Full-Bridge Type
  • Bluetooth Standard: 1.1
  • Size: 162.5*42.5*32mm
  • Transport Package: Paper Carton
  • Origin: Guangdong China (Mainland)

Original Meanwell LPV-60 Series Single Output Waterproof IP67 LED Driver Features:
1. Constant voltage design
2. Universal AC input / Full range
3. Withstand 300VAC surge input for 5 seconds
4. Protections: Short circuit / Over load / Over voltage
5. Cooling by free air convection
6. Small and compact size
7. Fully encapsulated with IP67 level (Note.7)
8. Fully isolated plastic case
9. Class 2 power unit, no FG, Class 2 power unit
10. Pass LPS
11. Suitable for LED Lighting and moving sign applications
12. 100% full load burn-in test
13. Low cost, high reliability
14. 2 years warranty


Original Meanwell LPV-60 Series Single Output Waterproof IP67 LED Driver Specifications:
 
MODEL LPV-60-5 LPV-60-12 LPV-60-15 LPV-60-24 LPV-60-36 LPV-60-48
OUTPUT DC VOLTAGE 5V 12V 15V 24V 36V 48V
RATED CURRENT 8A 5A 4A 2.5A 1.67A 1.25A
CURRENT RANGE 0 ~ 8A 0 ~ 5A 0 ~ 4A 0 ~ 2.5A 0 ~ 1.67A 0 ~ 1.25A
RATED POWER 40W 60W 60W 60W 60W 60W
RIPPLE & NOISE (max.) Note.2 80mVp-p 120mVp-p 120mVp-p 150mVp-p 150mVp-p 150mVp-p
VOLTAGE TOLERANCE Note.3 ±8.0% ±5.0%
LINE REGULATION ±1.0%
LOAD REGULATION ±6.0% ±2.0%
SETUP, RISE TIME        Note.6 500ms, 20ms / 230VAC 500ms, 20ms / 115VAC at full load(for 5~36V) ; 500ms, 30ms / 230VAC 500ms, 30ms / 115VAC at full load(for 48V)
HOLD UP TIME (Typ.) 50ms/230VAC    16ms/115VAC at full load
INPUT VOLTAGE RANGE         Note.4 90 ~ 264VAC    127 ~ 370VDC
FREQUENCY RANGE 47 ~ 63Hz
EFFICIENCY (Typ.) 76% 83% 83% 86% 86% 86%
AC CURRENT (Typ.) 1.2A/115VAC 1A/230VAC
INRUSH CURRENT(Typ.) COLD START 60A(twidth=525μs measured at 50% Ipeak) at 230VAC
MAX. No. of PSUs on 16A 3 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT 0.25mA / 240VAC
PROTECTION OVER LOAD 110 ~ 150% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE 5.75 ~ 6.75V 13.8 ~ 16.2V 17.25 ~ 20.25V 27.6 ~ 32.4V 41.4 ~ 48.6V 55.2 ~ 64.8V
Protection type : Shut down o/p voltage, re-power on to recover
ENVIRONMENT WORKING TEMP. -30 ~ +70ºC (Refer to "Derating Curve")
WORKING HUMIDITY 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY -40 ~ +80ºC, 10 ~ 95% RH
TEMP. COEFFICIENT ±0.03%/ºC (0 ~ 50ºC)
VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY &
EMC		 SAFETY STANDARDS UL879(except for LPV-60-5), UL1310(except for LPV-60-5), CSA C22.2 No. 207-M89(except for LPV-60-5, LPV-60-48),
CAN/CSA C22.2 No. 223-M91(except for LPV-60-5,LPV-60-48), IP67, IEC60950-1:2005+A2:2013 approved ; design refer to TUV EN60950-1
WITHSTAND VOLTAGE I/P-O/P:3KVAC
ISOLATION RESISTANCE I/P-O/P:>100M Ohms / 500VDC / 25ºC/ 70% RH
EMC EMISSION Compliance to EN55022 (CISPR22) Class B, EN61000-3-2 Class A, EN61000-3-3
EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A
OTHERS MTBF 732Khrs min.  MIL-HDBK-217F (25ºC)
DIMENSION 162.5*42.5*32mm (L*W*H)
PACKING 0.4Kg; 32pcs/13.8Kg/0.56CUFT
NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Derating may be needed under low input voltage. Please check the static characteristics for more details.
5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.
7. The unit might not be suitable for lighting applications in EU countries. Please check with your local authorities for the possible use of the unit.
8. Suitable for indoor use or outdoor use without direct sunlight exposure. Please avoid immerse in the water over 30 minute.
 
 
 

LED Street Light

LED Street Lights,Street Lamp,LED Street Lamp

LED Bulb Light Bracket Co., Ltd. , http://www.challleds.com

December 17, 2018