Zero Halogen Heat Shrink Cable Markers

Model NO.: MSVLU

Item: Zero Halogen Heat Shrink Cable Markers

Thermal Printer: Cab, Brady, Te, Zebra

Ribbon: Volsun Special Ribbon

Pre-Print: Available

Trademark: Volsun

Specification: RoHS

Origin: Jiangsu

HS Code: 8547909000

Model NO.: MSVLU

Item: Zero Halogen Heat Shrink Cable Markers

Thermal Printer: Cab, Brady, Te, Zebra

Ribbon: Volsun Special Ribbon

Pre-Print: Available

Trademark: Volsun

Specification: RoHS

Origin: Jiangsu

HS Code: 8547909000

MSVLU


Zero Halogen Heat Shrink Cable Markers


Description

MSVLU series is halogen free, environmentally friendly, Zero Halogen Heat Shrink Cable Markers. It is made of cross-linked environmentally friendly polyolefin bombarded by high power electron beam with electronic accelerators to meet high end markets where highly reliable, economical and environmentally friendly cable& wire identification is required. Zero Halogen Heat Shrink Cable Markers accords to the requirements of UL224, CAN/CSA C22.2. Shrink ratios, both 2: 1 and 3: 1 are available. See the below tables.






Features

Halogen free, ideally used for electronic or electrical circuits, communications, architectural industries
Temp. Resistance: 125° C
Highly flame retardant, VW-1
RoHS compliant and meet Sony SS-00259
High reliability, permanent identification
Heat sensitive, shrinking quickly
Computerized lettering or fonts at your disposal.
Standard Color: Yellow, white



Rated Temperature

Continuous operating temperature: -55° C~125° C/-67° F~257° F
Min. Shrink temperature: 85° C/185° F
Full recovery temperature: 115° C~200° C/239° F~392° F, 8~3minutes
Max. Storage and transportation temperature: ≤ 50° C/122° F



Standards

Material Standard: UL224, CAN/CSA C22.2
Color Code Soundness: SAE-AS 81531and MIL-STD-202F/215J







Dimension(2: 1)

Order Description	Expanded As Supplied ( mm )			Recovered After Heating ( mm )
	Inner Diameter ID1	Flatten width G	Dual Wall Thickness H	Inner DiameterID2	Single Wall Thickness h
MSVLU-2X-1.6/	2.00±0.20	3.7±0.3	0.48±0.10	≤0.79	0.45±0.06
MSVLU-2X-2.4/	2.79±0.20	5.0±0.3	0.48±0.10	≤1.18	0.49±0.06
MSVLU-2X-3.2/	3.64±0.23	6.3±0.4	0.48±0.10	≤1.59	0.51±0.06
MSVLU-2X-4.8/	5.26±0.25	8.9±0.4	0.49±0.10	≤2.36	0.54±0.06
MSVLU-2X-6.4/	6.92±0.28	11.5±0.4	0.50±0.10	≤3.18	0.56±0.06
MSVLU-2X-9.5/	10.2±0.32	16.7±0.5	0.51±0.11	≤4.75	0.59±0.06
MSVLU-2X-12.7/	13.5±0.36	21.8±0.6	0.52±0.11	≤6.35	0.60±0.07
MSVLU-2X-19/	20.1±0.40	32.2±0.6	0.53±0.11	≤9.53	0.62±0.07
MSVLU-2X-25/	26.7±0.45	42.5±0.7	0.55±0.12	≤12.7	0.63±0.07
MSVLU-2X-38/	39.8±0.51	63.2±0.8	0.57±0.12	≤19.1	0.64±0.07
MSVLU-2X-51/	53.0±0.56	83.9±0.9	0.58±0.13	≤25.4	0.64±0.08
MSVLU-2X-76/	79.4±0.56	125.3±1.0	0.59±0.13	≤38.1	0.64±0.09

Dimension(3:1)

Order Description	Expanded As Supplied ( mm )			Recovered After Heating ( mm )
	Internal Diameter ID1	Flatten Width G	Dual Wall Thickness H	Inner Diameter ID2	Single Wall Thickness h
MSVLU-3X-1.6/	2.00±0.20	3.7±0.3	0.47±0.10	≤0.53	0.52±0.06
MSVLU-3X-2.4/	2.79±0.20	5.0±0.3	0.47±0.10	≤0.79	0.57±0.06
MSVLU-3X-3.2/	3.64±0.23	6.3±0.4	0.48±0.10	≤1.06	0.61±0.06
MSVLU-3X-4.8/	5.26±0.25	8.9±0.4	0.49±0.10	≤1.59	0.67±0.06
MSVLU-3X-6.4/	6.92±0.28	11.5±0.4	0.50±0.10	≤2.36	0.71±0.06
MSVLU-3X-9.5/	10.2±0.32	16.7±0.5	0.52±0.11	≤3.18	0.77±0.06
MSVLU-3X-12.7/	13.5±0.36	21.8±0.6	0.53±0.11	≤4.75	0.80±0.07
MSVLU-3X-19/	20.1±0.40	32.2±0.6	0.55±0.11	≤6.35	0.84±0.07
MSVLU-3X-25/	26.7±0.45	42.5±0.7	0.56±0.12	≤8.47	0.86±0.07
MSVLU-3X-38/	39.8±0.51	63.2±0.8	0.57±0.12	≤12.9	0.89±0.07
MSVLU-3X-51/	53.0±0.56	83.9±0.9	0.57±0.13	≤17.2	0.90±0.08
MSVLU-3X-76/	79.4±0.56	125.3±1.0	0.59±0.13	≤25.8	0.92±0.09

Physicochemical& Electrical Performance

Performance			Indicators	Test Method
Typical properties	Unit	States
Tensile Strength	Mpa	Unaged	≥10.3	ASTM G 154,MIL-DTL-23053E ISO 37,500mm/min 175°C,168h,ISO 188
		Heat aged/ After fluids/UV aged	≥6.9
Elongation at break	%	Unaged	≥200
		Heat aged/ After fluid	≥100
Secant Modulus	Mpa	Unaged	<173	ASTM D 882
Voltage Withstand	V	Unaged / After aged	2500V,No breakdown in 60 sec.	IEC 243,ASTM G 154 175°C,168h,ISO 188
Dielectric Strength	MV/m	Before aged	≥19.7
		Heat aged/ After fluid/ UV aged	≥15.8
Volume Resistivity	Ω.cm	Unaged	≥10 14	IEC 93
Dielectric constant	-	Unaged	-	ASTM 150
Water Absorption	-	Unaged	≤1.0	ASTM 570,23°C,24h
Bare Copper Corrosion	-	Unaged	No corrosion	23°C,Rh 95±5%,24h 175°C,16h
Heat Shock	-	Unaged	No cracks, flowing, dripping	Wind to the specified mandrel,225°C,4h
Cold Flexibility	-	Unaged	No cracks	Wind to the specified mandrel, -30°C, 1h
Flammability	-	Unaged	VW-1	IEC 60332-1-3 Ed.1.0 b:2004
Longitudinal Change	%	Unaged	2X: -10~+1	200°C,Constant 3min
			3X: -15~+5
Smoke Density	-	Unaged	-	DIN 5510-2
Toxcity Index	-	Unaged	-	BS 6853:1999

Linkedin:
http://www.linkedin.com/company/suzhou-volsun-electronics-technology-co-ltd

Google+: http://plus.google.com/u/0/b/111367635491091005414/111367635491091005414/posts/p/pub

Blogger:
http://szvolsun.blogspot.com/

Website: 
www.szvolsun.com

Your Specialist in Insulation & Sealing and Protection Solution! 




MSVLU


Zero Halogen Heat Shrink Cable Markers


Description

MSVLU series is halogen free, environmentally friendly, Zero Halogen Heat Shrink Cable Markers. It is made of cross-linked environmentally friendly polyolefin bombarded by high power electron beam with electronic accelerators to meet high end markets where highly reliable, economical and environmentally friendly cable& wire identification is required. Zero Halogen Heat Shrink Cable Markers accords to the requirements of UL224, CAN/CSA C22.2. Shrink ratios, both 2: 1 and 3: 1 are available. See the below tables.






Features

Halogen free, ideally used for electronic or electrical circuits, communications, architectural industries
Temp. Resistance: 125° C
Highly flame retardant, VW-1
RoHS compliant and meet Sony SS-00259
High reliability, permanent identification
Heat sensitive, shrinking quickly
Computerized lettering or fonts at your disposal.
Standard Color: Yellow, white



Rated Temperature

Continuous operating temperature: -55° C~125° C/-67° F~257° F
Min. Shrink temperature: 85° C/185° F
Full recovery temperature: 115° C~200° C/239° F~392° F, 8~3minutes
Max. Storage and transportation temperature: ≤ 50° C/122° F



Standards

Material Standard: UL224, CAN/CSA C22.2
Color Code Soundness: SAE-AS 81531and MIL-STD-202F/215J







Dimension(2: 1)

Order Description	Expanded As Supplied ( mm )			Recovered After Heating ( mm )
	Inner Diameter ID1	Flatten width G	Dual Wall Thickness H	Inner DiameterID2	Single Wall Thickness h
MSVLU-2X-1.6/	2.00±0.20	3.7±0.3	0.48±0.10	≤0.79	0.45±0.06
MSVLU-2X-2.4/	2.79±0.20	5.0±0.3	0.48±0.10	≤1.18	0.49±0.06
MSVLU-2X-3.2/	3.64±0.23	6.3±0.4	0.48±0.10	≤1.59	0.51±0.06
MSVLU-2X-4.8/	5.26±0.25	8.9±0.4	0.49±0.10	≤2.36	0.54±0.06
MSVLU-2X-6.4/	6.92±0.28	11.5±0.4	0.50±0.10	≤3.18	0.56±0.06
MSVLU-2X-9.5/	10.2±0.32	16.7±0.5	0.51±0.11	≤4.75	0.59±0.06
MSVLU-2X-12.7/	13.5±0.36	21.8±0.6	0.52±0.11	≤6.35	0.60±0.07
MSVLU-2X-19/	20.1±0.40	32.2±0.6	0.53±0.11	≤9.53	0.62±0.07
MSVLU-2X-25/	26.7±0.45	42.5±0.7	0.55±0.12	≤12.7	0.63±0.07
MSVLU-2X-38/	39.8±0.51	63.2±0.8	0.57±0.12	≤19.1	0.64±0.07
MSVLU-2X-51/	53.0±0.56	83.9±0.9	0.58±0.13	≤25.4	0.64±0.08
MSVLU-2X-76/	79.4±0.56	125.3±1.0	0.59±0.13	≤38.1	0.64±0.09

Dimension(3:1)

Order Description	Expanded As Supplied ( mm )			Recovered After Heating ( mm )
	Internal Diameter ID1	Flatten Width G	Dual Wall Thickness H	Inner Diameter ID2	Single Wall Thickness h
MSVLU-3X-1.6/	2.00±0.20	3.7±0.3	0.47±0.10	≤0.53	0.52±0.06
MSVLU-3X-2.4/	2.79±0.20	5.0±0.3	0.47±0.10	≤0.79	0.57±0.06
MSVLU-3X-3.2/	3.64±0.23	6.3±0.4	0.48±0.10	≤1.06	0.61±0.06
MSVLU-3X-4.8/	5.26±0.25	8.9±0.4	0.49±0.10	≤1.59	0.67±0.06
MSVLU-3X-6.4/	6.92±0.28	11.5±0.4	0.50±0.10	≤2.36	0.71±0.06
MSVLU-3X-9.5/	10.2±0.32	16.7±0.5	0.52±0.11	≤3.18	0.77±0.06
MSVLU-3X-12.7/	13.5±0.36	21.8±0.6	0.53±0.11	≤4.75	0.80±0.07
MSVLU-3X-19/	20.1±0.40	32.2±0.6	0.55±0.11	≤6.35	0.84±0.07
MSVLU-3X-25/	26.7±0.45	42.5±0.7	0.56±0.12	≤8.47	0.86±0.07
MSVLU-3X-38/	39.8±0.51	63.2±0.8	0.57±0.12	≤12.9	0.89±0.07
MSVLU-3X-51/	53.0±0.56	83.9±0.9	0.57±0.13	≤17.2	0.90±0.08
MSVLU-3X-76/	79.4±0.56	125.3±1.0	0.59±0.13	≤25.8	0.92±0.09

Physicochemical& Electrical Performance

Performance			Indicators	Test Method
Typical properties	Unit	States
Tensile Strength	Mpa	Unaged	≥10.3	ASTM G 154,MIL-DTL-23053E ISO 37,500mm/min 175°C,168h,ISO 188
		Heat aged/ After fluids/UV aged	≥6.9
Elongation at break	%	Unaged	≥200
		Heat aged/ After fluid	≥100
Secant Modulus	Mpa	Unaged	<173	ASTM D 882
Voltage Withstand	V	Unaged / After aged	2500V,No breakdown in 60 sec.	IEC 243,ASTM G 154 175°C,168h,ISO 188
Dielectric Strength	MV/m	Before aged	≥19.7
		Heat aged/ After fluid/ UV aged	≥15.8
Volume Resistivity	Ω.cm	Unaged	≥10 14	IEC 93
Dielectric constant	-	Unaged	-	ASTM 150
Water Absorption	-	Unaged	≤1.0	ASTM 570,23°C,24h
Bare Copper Corrosion	-	Unaged	No corrosion	23°C,Rh 95±5%,24h 175°C,16h
Heat Shock	-	Unaged	No cracks, flowing, dripping	Wind to the specified mandrel,225°C,4h
Cold Flexibility	-	Unaged	No cracks	Wind to the specified mandrel, -30°C, 1h
Flammability	-	Unaged	VW-1	IEC 60332-1-3 Ed.1.0 b:2004
Longitudinal Change	%	Unaged	2X: -10~+1	200°C,Constant 3min
			3X: -15~+5
Smoke Density	-	Unaged	-	DIN 5510-2
Toxcity Index	-	Unaged	-	BS 6853:1999

Linkedin:
http://www.linkedin.com/company/suzhou-volsun-electronics-technology-co-ltd

Google+: http://plus.google.com/u/0/b/111367635491091005414/111367635491091005414/posts/p/pub

Blogger:
http://szvolsun.blogspot.com/

Website: 
www.szvolsun.com

Your Specialist in Insulation & Sealing and Protection Solution! 

LED Table Lamp

LED Table Lamp,Desk Lamp ,LED Desk Lamp ,Reading Lamp

Table Lamp & Reading Light Co., Ltd. , http://www.nbledlamp.com