Sheath Repair Kit Armorcast Structural Material Tape Cable Protection Bandage

Armorcast Structural Material is packed (rolls) dry in a sealed foil envelope and is a flexible fiberglass knit fabric strip that has been saturated with a curable black urethane resin syrup that starts to cure when water is added. Once wet, the fiber strip becomes tacky and sticks to itself, so it wraps easily around almost any shape or size. Armorcast Structural Material is resistant to moisture, fungus, acid, alkali, ozone, sunlight, gasoline and high temperatures. It combines long life and very little maintenance. 

 

Armorcast Structural Material is perfect for strengthening old cable, splices and auxiliary seals. No reworking is required, it's ready to wrap straight from the package. Armorcast Structural Material is fast and easy to apply, yet hardens to a strong, maintenance-free coating. The fiberglass reinforced composite material forms a tough, durable covering that will harden in approximately 30 minutes and fully cures in 24 hours. Armorcast Structural Material can be used on pressurized or non-pressurized cable and either polyethylene or lead sheathed cable.
 

Service we have *Factory Manufacture  *15 years professional manufacture armor cast tape *CE certificate *7-15 days lead time   *Free samples available for quality testing     *OEM your size and backing Contact   Sales manager: Eileen Wong   Mob: +86-18710743935   How to use the Armor cast   1. Prepare the surface by cleaning and roughening the cable   2. Put on enclosed latex gloves.     3. Put water into the packing bag, press several seconds and take out the tape. Squeeze out excess water.   4. Apply around the cable extending up to 50mm either side of the cable to ensure complete coverage.       It is important that the bandage is applied.   5. Quickly as curing begins once it is taken out of the water.     6. When wrapping, pull each layer tightly by using your hand to mould and squeeze the layers together.   7. Continue this action during and upon completion.     Size we can manufacture for Armor cast Welcome to OEM your size   Name P/N Size Also provide Fiberglass armor cast Armor tape Armor wrap Armor Belt AT460 10cm x 460cm (4inch x 5yards) (4'' x 15') Gloves AT300 10cm x 460cm (4inch x 5yards) (4'' x 15') AT150 10cm x 150cm (4inch x 1.6yards) (4'' x 5' Package we made     Shippment   1. By sea  2. By air  3. By Express   Ansen Exhibition Ansen is factory and devoted to armorcast since 2003. The machine equipments are imported from Germany.Now we are doing business with more than 20 countries and regions, such as Europe, United States, South Africa, Asia and Middle East. ANSEN COMPANY

Armorcast Structural Material is packed (rolls) dry in a sealed foil envelope and is a flexible fiberglass knit fabric strip that has been saturated with a curable black urethane resin syrup that starts to cure when water is added. Once wet, the fiber strip becomes tacky and sticks to itself, so it wraps easily around almost any shape or size. Armorcast Structural Material is resistant to moisture, fungus, acid, alkali, ozone, sunlight, gasoline and high temperatures. It combines long life and very little maintenance. 

 

Armorcast Structural Material is perfect for strengthening old cable, splices and auxiliary seals. No reworking is required, it's ready to wrap straight from the package. Armorcast Structural Material is fast and easy to apply, yet hardens to a strong, maintenance-free coating. The fiberglass reinforced composite material forms a tough, durable covering that will harden in approximately 30 minutes and fully cures in 24 hours. Armorcast Structural Material can be used on pressurized or non-pressurized cable and either polyethylene or lead sheathed cable.
 

Service we have *Factory Manufacture  *15 years professional manufacture armor cast tape *CE certificate *7-15 days lead time   *Free samples available for quality testing     *OEM your size and backing Contact   Sales manager: Eileen Wong   Mob: +86-18710743935   How to use the Armor cast   1. Prepare the surface by cleaning and roughening the cable   2. Put on enclosed latex gloves.     3. Put water into the packing bag, press several seconds and take out the tape. Squeeze out excess water.   4. Apply around the cable extending up to 50mm either side of the cable to ensure complete coverage.       It is important that the bandage is applied.   5. Quickly as curing begins once it is taken out of the water.     6. When wrapping, pull each layer tightly by using your hand to mould and squeeze the layers together.   7. Continue this action during and upon completion.     Size we can manufacture for Armor cast Welcome to OEM your size   Name P/N Size Also provide Fiberglass armor cast Armor tape Armor wrap Armor Belt AT460 10cm x 460cm (4inch x 5yards) (4'' x 15') Gloves AT300 10cm x 460cm (4inch x 5yards) (4'' x 15') AT150 10cm x 150cm (4inch x 1.6yards) (4'' x 5' Package we made     Shippment   1. By sea  2. By air  3. By Express   Ansen Exhibition Ansen is factory and devoted to armorcast since 2003. The machine equipments are imported from Germany.Now we are doing business with more than 20 countries and regions, such as Europe, United States, South Africa, Asia and Middle East. ANSEN COMPANY