Model NO.: LED361
Flashing Patterns: 18
Usage: Fire Lights, Traffic Lights, Emergency Vehicle
Brackets Included: Surface Mount
Electric  Current: <=1.2A
Trademark: Starway
Transport Package: Exporting Carton
Specification: 144x50x41mm
Origin: China
HS Code: 8512209000
Model NO.: LED361
Flashing Patterns: 18
Usage: Fire Lights, Traffic Lights, Emergency Vehicle
Brackets Included: Surface Mount
Electric  Current: <=1.2A
Trademark: Starway
Transport Package: Exporting Carton
Specification: 144x50x41mm
Origin: China
HS Code: 8512209000
1.Features
- Â Work voltage:DC12V / 24V
-  Life  Span: 100,000  Â
- Â G-3 LEDs with 4 bulbs
- Â Â Waterproof and shockproof
- 18 flash patters to pick up and can flash two lightheads together for  synchronizationÂ
-  Perfect  for interior and outer applications Â
2. Specifiation
| Model
|
LED361 Warning Grille lights |
| Work voltage |
DC12V / DC24V |
| Type |
Traffic Signal |
| Light Sources |
LEDS(G-III) |
| Type |
Traffic Signal |
| Electric  Current |
<=1.2A |
| Bulb number |
4 |
| Material of lens |
PC |
| Flash patterns |
15 |
| Color |
Red/Blue/Amber/Clear/Green |
3. Mounting
- Position the unit in its proposed mounting location. Draw a pencil line onto the mounting surface along the top and bottom of the extrusion and a "centerline" centered between the two.
- Two 1/4" holes are required to mount this unit. These holes may be located anywhere along the holes as far apart as possible. ---Mark the hole location onto the mounting surface.
- Using a 1/4" drill bit, drill a hole in each of the areas scribed in the previous step.
- Slide the 2 carriage bolts (installed in the rear of the bar) insert them into the mounting holes.
- Secure the unit by threading the flat washer and elastic stop nut onto each bolt and tightening them firmly.
4.Wiring
See illustration diagram for wiring information
WARNING! All customer-supplied wires that connect to the positive terminal of the battery must be sized to supply at least 125% of the maximum operating current and at the battery to carry the load. DO NOT USE CIRCUIT BREAKER SWITH THIS PRODUCT!
Â
1.Features
- Â Work voltage:DC12V / 24V
-  Life  Span: 100,000  Â
- Â G-3 LEDs with 4 bulbs
- Â Â Waterproof and shockproof
- 18 flash patters to pick up and can flash two lightheads together for  synchronizationÂ
-  Perfect  for interior and outer applications Â
2. Specifiation
| Model
|
LED361 Warning Grille lights |
| Work voltage |
DC12V / DC24V |
| Type |
Traffic Signal |
| Light Sources |
LEDS(G-III) |
| Type |
Traffic Signal |
| Electric  Current |
<=1.2A |
| Bulb number |
4 |
| Material of lens |
PC |
| Flash patterns |
15 |
| Color |
Red/Blue/Amber/Clear/Green |
3. Mounting
- Position the unit in its proposed mounting location. Draw a pencil line onto the mounting surface along the top and bottom of the extrusion and a "centerline" centered between the two.
- Two 1/4" holes are required to mount this unit. These holes may be located anywhere along the holes as far apart as possible. ---Mark the hole location onto the mounting surface.
- Using a 1/4" drill bit, drill a hole in each of the areas scribed in the previous step.
- Slide the 2 carriage bolts (installed in the rear of the bar) insert them into the mounting holes.
- Secure the unit by threading the flat washer and elastic stop nut onto each bolt and tightening them firmly.
4.Wiring
See illustration diagram for wiring information
WARNING! All customer-supplied wires that connect to the positive terminal of the battery must be sized to supply at least 125% of the maximum operating current and at the battery to carry the load. DO NOT USE CIRCUIT BREAKER SWITH THIS PRODUCT!
Â