Programmable DC Power Supplies The CSP series Programmable DC Power Supply is upgraded and developed on the basis of iDealTek-Electronics' mature IGBT high frequency switching power topology and all-digital signal control loop. Featured with high precision, low ripple and fast response speed. Programmable Power Supplies, DC Programmable Power Supplies, Programmable AC - DC Power Supplies, Programmable AC DC Power Supplies, Programmable Laboratory Power Supplies Yangzhou IdealTek Electronics Co., Ltd. , https://www.idealtekpower.com
Crystal lighting has now become a major trend of home lighting decoration, but the maintenance of crystal lighting many people feel a headache, let us learn about the maintenance of crystal lighting it.
1, to maintain the crystal ball or crystal long-term translucent, need to avoid smoke damage to the crystal lighting.
2, Crystal lighting cleaning can choose to scrub the crystal ball or wafer method one by one, if you find it troublesome, you can spray professional cleaners on the crystal lighting, the detergent in the process of volatilization can take away the crystal ball or crystal on the dust. It should be noted that it is best not to clean the light with water, as long as it is wiped with a dry rag.
3, moisture is the key to lighting and maintenance, especially the bathroom, bathroom lamps and kitchen stove lamp, must install moisture-proof lampshade to prevent moisture intrusion, to avoid rust damage or leakage short circuit.
4. Regularly clean the lampshade, lamp, and light bulb to prevent dust from affecting the lighting effect or consuming unnecessary power. If it is found that there are black shadows on both ends of the lamp or there is black deposit in the water bag, it should be replaced in time.
The Programmable DC Power Supply is different from the traditional DC power supply that can only control the output voltage and current values. The programmable DC Power Supplies can realize the programming of multiple parameters through adding the microprocessor unit with built-in control program, such as parameters like operating time, output rise time, protection response time, OVP and OCP etc. All can be set and programmed.
At the same time, the microprocessor unit also adds more functions to the power monitoring system, which can realize the query of the historical data of the test results, making the programmable DC power supply the best choice for laboratory test, production line manufacturing test, photovoltaic plate aging test and various cutting-edge applications with Programmable DC power supplies.
This series of Programmable Power Supplies have a total of 4 standard rated power levels, ranging from 1KW Desktop Programmable Laboratory power supplies to 3KW / 6KW / 10KW Rack-mounted Programmable DC power supplies. The maximum output voltage ranges from 600V to 1000V under different rated powers.
Beautiful appearance design with small and compact size, the whole series power supplies adopt silicone buttons, stepless knobs and LCD display on control panel layout. The output voltage, current, start / stop time, output rising rate, OVP, OCP and other parameter setting programming and reading of the Programmable Power Supplies can be easily and quickly completed through the front panel man-machine interface, up to 5 digits of high-precision programming and monitoring levels make the measurement results of the programmable DC power supply accurate and reliable, almost no need to use external power meters.
At the same time, the whole series of programmable DC power supplies are equipped with RS485 interface as standard, following the MODBUS-RTU international protocol, which can realize remote control programming, test results save and uploading to the master unit and status monitoring of the power supply.