Note on the use of LED rental screens must be kept in mind

At the current festival celebrations and large-scale evening parties, stage LED displays are widely demanded. On the one hand, the use time is not long, it is more economical to rent; on the other hand, the installation company and the on-site committee of the rental company save unnecessary trouble. Next, let's share with you the things you need to pay attention to when renting and using the stage LED display.

Stage LED display rental needs to pay attention to:

Company reputation

There is a team of stage led display rental professional, stage led display rental is a first-class equipment, and customer service is better, otherwise it is a headache after the charge or not handled well.

2. LED display rental price

The price of the stage LED display rental, the current market is about 800 square meters, in addition to the length of the lease, screen size, type to calculate the price, give a reasonable offer.

3.LED rental screen quality

The flatness, brightness and viewing angle of the LED display, the reproducibility of the color, and the presence or absence of dead spots all affect the playback effect of the stage LED display, which will also affect the atmosphere of the event.

Precautions for the use of the stage LED display:

1. The shooting distance should be appropriate

As mentioned in the previous discussion of point spacing and fill factor, the stage LED display with different dot pitch and different fill factor, the suitable shooting distance is different. For example, an LED display with a dot pitch of 4.25 mm and a fill factor of 60% is suitable for a distance between 4 and 10 meters, so that a good background image can be obtained when shooting a character.

2. Guarantee a good use environment

The stage LED display is mainly composed of a control board, a switching power supply, a light-emitting device, etc., and the life and stability of all these components are closely related to the operating temperature. If the actual working temperature exceeds the scope of use specified by the product, not only will its life be shortened, but the product itself will also be severely damaged. In addition, the threat of dust cannot be ignored. Working in a dusty environment, because the PCB absorbs dust, and the deposition of dust will affect the heat dissipation of the electronic components, the temperature of the components will rise, and then the thermal stability will decrease or even cause leakage, which will lead to burning. Dust also absorbs moisture, which can corrode electronic circuits, causing short-circuit problems that are difficult to check. Pay attention to keep the studio clean, avoid dust, and do well in advance.

10mm Red Through-Hole LED(DIP LED) manufacturer from China.


For this catalog, we mainly introduce the 10mm Red Through-Hole LED.

10mm Through-hole LED, we supply 10mm red LED with water clear lens, 10mm red LED with diffused lens, 10mm red LED with red clear lens and 10mm red LED with red diffused lens. In addition, the shape can be 10mm round LED without flange(fringe), 10mm short head LED, 10mm bullet top red LED, 10mm round red LED with flange ect.

10mm Red Through-hole LED widely used for Red sign, display LED, indicator LED, die hole LED and 10mm round red with lamp holder because of the high brightness and the small size.

For the pin of 10mm red through-hole LED, we also have a lots of choice on it. For example: 10mm Red Through-hole LED flat pin, 10mm Red Through-hole LED curved pin, 10mm Red Through-hole LED braided pin ect.
10mm RED LED
For the brightness of 10mm red through-hole LED, we have three level: common bright 10mm red through-hole LED, super bright 10mm red through-hole LED and ultra bright 10mm red through-hole LED.

For the angle of 10mm red through-hole LED, 15 degrees, 30 degrees, 45 degrees, 60 degrees, 120 degrees are available.

For the raw materials, we use the LED chip from Taiwan Epistar, Tyntek, Optotech. The stability of our products have been recognized by all of our custom.


We supply kinds of 10mm Through-hole LED with different wavelength from 365nm to 1550nm, which include the visible LED and the invisible LED.


All of our product are meet with Reach, CE, RoSH, SGS, EN62471 standards and have 5 years warranty.


10mm Red Through-Hole LED

10mm Red Through-Hole LED, Oval 10mm Red Through-Hole LED, Super Bright Red Through-Hole LED, Through-hole 10mm LED Diodes

Shenzhen Best LED Opto-electronic Co.,Ltd , https://www.bestsmd.com