Several analysis of drone chargers

1,308 charger

Supports a wide variety of batteries, each channel supports 8 strings of LiPo, Lilo, LiFe and NiZn, the maximum current of 1.2A, supports 1-20 series of nickel-metal hydride, nickel-cadmium battery charging; supports 1-15 string lead-acid battery charging . The charging power is up to 1300W, the channel charging and discharging current is up to 30A, and the two-channel synchronous mode charging and discharging current is up to 50A. Whether it is a model friend of that type of aircraft, this charger can be called a universal charger. In addition, its function is also very powerful, with discharge function, internal insulation function, internal resistance test function. Such a multi-function is very worrying for the user. It is very troublesome to set up. It is not a big problem for the model friends who love to play, but it is pressed according to the press, but for the purpose of work, such as plant protection. For the aerials of aerial photography and aerial survey, time is money! Such a complicated flying hand will not necessarily remember in the short term. The price is moderate to buy a charger and then add a power supply price is 2000.

2.4010 drone charger

The charging power is up to 2000W, the channel charging and discharging current is up to 40A, the two-channel synchronous mode charging and discharging current is up to 70A, the channel supports 10s LiPo, Lilo, LiFe, and the maximum 1.2A balancing current is larger than 308 power and charging current. However, for lithium batteries, it is necessary to look at the most suitable charging current. The current is too large to affect the battery province. Its other functions are basically the same as 308. Plus the power cord price is basically 3000, it is a bit expensive~

3.A6 drone charger

The new type can charge 2 sections 6S/5S/4S or 4 sets of 3S or 6 sets of 2S at the same time, the current can be set, the charging current setting range is 0.2A~8A, of course, it can also discharge, balance discharge discharge current 0.1A~2.5A, The maximum output power is 200W. The current is very small, suitable for aerial photography and aerial survey aircraft, but it is not practical for the plant protection charging current is too small. The price is also lower than 400.

4.pl6, pl8 drone charger

The difference between PL8 and PL6 is that 8 supports up to 8S, and 6 supports up to 6S charging, all of which are 40A charging. There are functions such as energy saving, environmental testing, voltage measurement, support and charging, but I don't want to look at it any more, it is too much trouble. However, if you buy it, you should study it carefully. Pl6 with Delta power supply price is in the early 2000s, pl8 with Delta power supply price is about 2500.

5. Portable drone charger

This charger was launched by Zhengzhou Zhengfang Technology. The biggest highlight is that it is easy to operate and convenient.

The 220V power supply can be directly charged, and the charging current is 20A. The charger also has a discharge function. If the battery is to be stored, the charger can charge or discharge the battery to the optimal storage state. Currently, it only supports the charging and discharging of the 6S battery, and can charge two groups at a time. There are a lot of chargers, but the aircraft on the plant protection basically use 6S, so the impact is not too big. For the plant protection and the farmers, it really saves a lot of operation process, and it is very simple to work. The price should be lower than 1600.

The above are some of the chargers that we often use. In summary, for the users of professional plant protection, the portable drone charger is a good choice. The price is low. It is very simple and convenient to use. For aerial photography and aerial survey. A6 may be enough, but some users just want a little more function, and don't bother with 4010, 308, pl6. The above is a rough analysis of these chargers, please do not hesitate to analyze them.

Click to learn about drone charger products.