Rf Connection Cables,Waterproof Sma Connector,Sma F Connector,Sma Connector Types Dongguan Zhuoyuexin Automotive Electronics Co.,Ltd , https://www.zyx-fakra.com
Rf Connection Cables,Waterproof Sma Connector,Sma F Connector,Sma Connector Types Dongguan Zhuoyuexin Automotive Electronics Co.,Ltd , https://www.zyx-fakra.com
TSY-19 Geotextile Thickness Gauge
The TSY-19 geotextile thickness gauge is designed to measure the thickness of geotextiles and geomembranes under different pressure conditions. It operates on the principle of leverage, amplifying the length of the pressure arm to achieve accurate measurements even with limited weight and space. The device applies pressures of 2 kPa, 20 kPa, and 200 kPa to test the sample's thickness, making it ideal for quality control in production lines.
This instrument is not only simple in design but also user-friendly, featuring an elegant structure that makes it easy to handle. It is widely used in laboratories and manufacturing settings due to its reliability and precision. The TSY-19 complies with several international standards, including GB/T 13761, T1112-2006, ISO 9863:1990, and SL/T 235-2012, ensuring consistent and standardized results across various applications.
Technical Specifications:
- Presser foot area: 25 cm² (diameter: 56.42 mm)
- Presser foot weight: 5 N (equivalent to 510.2 g for 2 kPa pressure)
- Secondary pressure: 20 kPa ± 0.1 kPa
- Three times weight: 200 kPa ± 1 kPa
- Dial indicator range: 0–12 mm, with a resolution of 0.01 mm
- Instrument dimensions: 730 × 320 × 350 mm (L × W × H)
- Instrument weight: 25 kg
Installation and Usage Instructions:
Before use, ensure the instrument is placed on a flat surface and adjusted to level using the four corner screws. A soft rubber pad should be placed under each leg to prevent vibrations. Keep the accessory box nearby for storage and future reference.
For testing, samples must be prepared according to standard procedures. The cam handle is turned counterclockwise to lift the presser foot and apply the required pressure. Replaceable presser feet are selected based on the sample’s thickness range—geotextiles and geomembranes have different adaptability ranges.
Once the correct presser foot is installed, the dial gauge is calibrated by placing it on the reference plate and adjusting it to zero. The sample is then inserted between the reference plate and the presser foot, and the pressure is applied for 30 seconds before recording the reading.
For different pressure levels (20 kPa and 200 kPa), additional weights are added to the pressure plate. The process is repeated for each required pressure, ensuring accurate and repeatable results.
Important Notes:
- The instrument should be stored in a clean, vibration-free environment to maintain accuracy.
- All replaceable parts must be handled carefully to avoid damage or contamination.
- Avoid modifying the internal adjustments, as this can affect measurement consistency.
- If any inaccuracies are detected during use, consult a professional technician rather than attempting repairs yourself.
This geotextile thickness gauge is an essential tool for any facility involved in geosynthetic material testing, offering both precision and compliance with global testing standards.
Factory direct 0603 emerald green, 0603 green (0.6 thickness) - a large quantity available at low prices
Factory direct sales - SMD aluminum electrolytic capacitor - straight plug solid capacitors, made in Japan using high-quality aluminum foil