GaN LED market lighting share will increase by 28% in 2016

The latest quarterly IMS Research report on the supply and demand of GaN LEDs shows that GaN LED package revenue in 2011 decreased by 6% from last year, mainly due to the following reasons:

• From 2010 to 2011, the growth rate of the supply side was almost three times that of the demand side, resulting in huge price pressures and lower levels of capacity utilization at various LED factories. The quantitative data in the report shows that the LED surplus will further increase in 2012.

• As panel shipments and LED penetration were all lower than expected, the average price of LEDs used for backlighting fell by 34%, and backlighting revenue dropped by 13% to $4.8 billion.

• LED revenue for TVs fell by 5% to US$1.9 billion in 2011, and the penetration rate was 39% lower than the original expectation of 43%.

IMS Research expects that the GaN LED market will gradually pick up from 2012 to 2015, and due to the accelerated development of the lighting market, there will be double-digit growth in 2013 and 2014. Highlights include:

• The market is expected to grow by 5% in 2012, but it is still below the 2010 level. Backlight growth is slow, and lighting will increase by 30%.

• It is expected that LED's revenue in lighting applications will exceed backlight applications in 2012, one year ahead of the original estimate. The main reason is that the demand for LED lighting increases, and the penetration rate of LED TVs decreases, and in order to exploit the developing market, TV manufacturers have introduced low-cost direct-entry LED backlight products.

• Due to reduced brightness, low-cost direct-down LED backlights use approximately half of the LED chips of conventional metering-type backlights. The cost difference between TV and CCFL TVs using this new type of backlight technology has been reduced.

• In the GaN LED market, the share of lighting is expected to increase from 21% in 2011 to 49% in 2016; lighting LED revenue is expected to grow by more than 300%.

We combine the Bluetooth speaker with RGBW Light, one switch easy control four lighting modes: warm white lighting mode, no lighting mode, dazzling lighting mode, RGB lighting mode. High-quality speaker with loud, clear sound, combine with color lighting, can be used in the bedrooms, gardens, and swimming pools. 



We offer two kinds of Bluetooth speakers, one is with plastic sticker, it can be used in garden, waterproof index is IP44; the other one is with waterproof plug, it can be used around swimming pool, waterproof index is IP67.


Product parameters


Product dimension: Dia 155mm x H 45mm
Material: ABS+PC
Weight: 300g
LED Color: RGB+Warm White
LED Power: 0.5W
Speaker Power: 5W
Lamp Current: 15-20mA
LED Qty: 8pcs RGB lamp beads+4pcs Warm White lamp beads
Battery Capacity: 3.7V, 1000mA (Li battery included)
Protocol: Bluetooth 4.1-CSR
Charging type: by a USB charger
Control Distance: 10m ( No obstacles)
Charging Time: 1.5 hours 
Continue Use Time: 3-5 hours 
Packing: Each in a color box
Warranty: 1 Year
Certification: CE (EMC,RED) ,ROHS, SCC, BQB,FCC
Suitable Occasions: Indoor and outdoor, can be used in the swimming pool as a Floating Speaker With Light


outdoor speaker with lightwaterproof light speaker




Bluetooth Speaker With Light

Bluetooth Speaker With Light,Bluetooth Speaker Light,Bluetooth Mesh Light, Bluetooth Wireless Speaker Light

Ningbo Homey Photoelectric Technology. Co., Ltd , https://www.linkuphome.com