The Description Of Flat Amplified TV Antenna
Innovative flat,razor-thin antenna design.
The Specification Of Flat Amplified TV Antenna
Features
Flat Amplified TV Antenna,TV Antenna With Amplifier,Digital Flat TV Antenna,Flat TV Antenna Shenzhen Yetnorson Technology Co., Ltd. , http://www.yetnorson.com
This series is small (30x30x11mm, 106.2x32.9x21.5mm, 48.9x42x20mm) and easy to fit into LED fixtures for commercial space lighting. In terms of architecture, the power supply part is independent of the luminaire, and is not susceptible to the overheating of the LED luminaire, which affects the service life, and has a service life of up to 50,000 hours and high reliability.
This series of products supports PWM dimming, the effect is smooth and stable, and uses a high-power driver with multiple sets of DC output, can drive multiple sets of lamps at the same time, the driver does not need to install the driver inside; and the DC/DC DC boost or drop is installed. After the pressure converter, with a simple dimming structure, the overall lighting parts and installation costs are reduced. And the product meets the ultra-low voltage output, which can protect the safety of the operation and installation personnel. 
Flat Amplified TV Antenna It has high gain and low error rate Digital TV signal reception,and a significant signal enhancement in actual ues.Increase the reception of TV programs,and eliminate the pause the mosaic images.
Multi-directional design pulls in signals from all directions.
Fast and easy to set up - Unwrap,Plug it in and Scan channels.
IMPORTANT TIP BEFORE YOU BUY:You have to make sure your TV is Digital TV, the local signal is COVERED.You can put it on the wall,on the table or on the window(strongly recommended) and it will make you enjoy watching crystal clear digital & HD shows with many opportunities.
1.Support 1080p.
2.50 miles range.
3.Multi-directional capability.
4.call out all "Free" channels.
5.Connector Type:F Male.
6.V.S.W.R.:<1.5
7.Working Frequency: 174~240MHz,470~862MHz.
8.Gain:25 dBi(with amplifier).
Picture show
[High-tech LED News] HEP Group recently released a series of DC/DC DC step-up or step-down converters (DC/DC Converter) for LED lamp applications. There are 12 kinds of boosters for different current outputs of 350mA and 700mA. Type; and three 350mA constant current step-down models.