ORICO Oleg 6218 Hard Disk Base Compared with IT-CEO IT-713 Mobile Hard Disk Enclosure

That is, since the first original release, I did not expect such a quick second article. I was still tangled up in the second article and wrote a comparison between Skechie's go walk 3 and 4 or wrote Mai Ruibao’s different brands of filters. Contrast (yes, I just like to compare things to find out what is best for myself). As a result, I saw an unpacking about the superior hard disk base in Aunt Zhang’s today. Among them was a friend in the comments area. IT-CEO's pedestal and Orcco's comparison, so there is this second article. Well, less nonsense, start the text.

To tell the truth, as a senior resource collector, it is almost effortless to fill up the hard drives full of the chassis. Not to mention the impact of the close of the network drive some time ago, the hard drive in the computer has long been plugged, and the chassis can no longer be installed. When I have more hard drives, I can only choose an external hard drive. As there are many small hard drives that have been replaced, I have chosen to buy a mobile hard disk drive to make the transition. However, the 3.5-inch mobile hard disk drive is too eye-catching, so I bought the Ortek's hard drive chassis to try it out some time ago.

To tell the truth, like many value-friends, my impression of Oreco's brand is not very good. It is mainly due to the previous experience: I first contacted Oerlikon or it was a long time ago when I wanted to use IDE's hard disk waste. , So I bought an IDE to SATA interface, the results can not be used even if plugged in, but also to the hard disk to burn, which laid the position in my heart; the second is to buy a USB3 in JD. 0 of the hub, the results of the 3.0 U disk it can only recognize a miscellaneous brand, Toshiba, SanDisk, Transcendence, Granville, one can not identify, to lay its position. This time to buy the base, it would not buy it, but check it out, or he is the cheapest, no way, bite the bullet slightly.

First look at Orrick's hard drive base, the front is a glossy plus a logo, the reverse side from left to right is the power interface, data line interface and power button, the above is a matte surface and a power indicator (with data written When you enter, it will flicker.) In general, the texture is normal, but the slot shutter feedback is good. The weight is not heavy, it is estimated that the weight of two IT-713, which makes me very worried about its stability during operation.

Take a look at the comparison IT-713, this material and work without texture and highlights, but the value of friends evaluation that the master chip is good, so buy to try, the actual use is indeed good.

In order to compare the test without the influence of the mechanical hard disk speed, the hard disk used for testing this time selects the solid state disk. The one selected is Jinsheng’s E330 (don't Tucao, this is my only ssd that can be used without disassembling). , when the special price to start, when the U disk, 159 yuan 120G, close to 1G 1 yuan in the heart of the target, now it has 299, it is not worth it.

When inserting a 1T mechanical hard disk into Orchest's base, there is a gap between the front and rear and left and right sides, especially its front and rear positions, so that the hard disk can be shaken back and forth by hand (estimated space for a larger hard disk), and the At the time, due to the mechanical hard disk speed of 7200 rpm, it will not run on the table directly, but the voice sounds as if it has opened four garbage chassis fan ears, leaving 10M far can be heard faintly, if you insist on using mechanical hard drives A few books under the pad can greatly reduce the noise. There is also the base will not sleep after a period of time, but the impact is not great, just slow down when reopening.

Well, the following speed test began, because the old 990FX motherboard has only one USB3.0 jack, so the use of Green Alliance HUB transfer, the speed may have an effect, but the same conditions, so the test is still a certain reference.

The first is the base of Orics, except that at the beginning, the speed of writing reaches 100+M/s, and the average speed is between 50 and 60. It seems to be right.

Take a look at IT-713,

Do not say anything, give yourself a look and feel.

Oerlikon really reaffirmed its position in my heart once again, to several times the price of mobile hard disk box, reaching less than half of the performance of people (although it may be affected by the Green Alliance HUB or the third party on the motherboard USB3.0 chip, but this compatibility is no one, in the final analysis or the quality of the problem), and only some of the value can be said. IT-713 is worthy of recommendation box, worth buying.