Tender number: DT60-20161020G
Tender code: CBL_20161115_188839120
Bulletin category: Domestic tender tenderer: Shanxi Datang International Yuncheng Power Generation Co., Ltd. Source of funds: Others
10KV 584 Distribution Lines and Auxiliary Equipment Maintenance Purchase Documents I. Overview:
Shanxi Datang International Yuncheng Power Generation Co., Ltd. is located in Fenglingdu Town, Yuncheng County, Yuncheng City, Shanxi Province, about 1.5km away from Fenglingdu Town in the east, about 35km from Fucheng County, and about 90km away from Yuncheng City in the north. The power plant is located on the west side of Fenglingdu Economic Development Zone. The installed type is a 2×600MW subcritical coal-fired air-condensing steam turbine unit.
This project is the emergency backup power source of Yuncheng Power Generation Company, namely Fenglingdu Substation to Yuncheng Power Generation Company's 500KV booster station's 10KV power supply 584 distribution line and auxiliary equipment maintenance.
Second, the purchase of the subject:
1. Inquiry Item No.: DTYD-FZBCG-2016- SB-
2. Inquiry item name: 10KV 584 distribution line and auxiliary equipment maintenance
3. Project Description: Maintenance of 10KV 584 power distribution lines, poles, porcelain bottles, arresters, cables and other auxiliary equipment from the Fenglingdu Substation to Yuncheng Power Generation Company's 500KV booster station. III. Response file requirements:
1. The answer file contains the technical part, the business part and the quotation.
2. Suppliers must provide the following documents:
2.1 Company qualifications, business licenses, tax registration certificates, organization code certificates, copies of account opening licenses, copies of legal representative ID cards valid for annual inspections, and non-statutory representatives should be accompanied by a power of attorney and be affixed A copy of the ID card of the client and the format of the power of attorney are attached, and all of them must be affixed with the company's red valid official seal.
2.2 The supplier's performance or contract certification in the past three years.
2.3 The supplier has good bank credit and business reputation, is not being ordered to suspend business or goes bankrupt, and the assets have not been restructured, taken over and frozen.
Fourth, technical specifications
1 General
1.1 This technical specification applies to the maintenance of 10KV 584 distribution lines and auxiliary equipment of Yuncheng Power Generation Company.
1.2 This technical agreement will be an attachment to the contract and has the same effect as the text of the contract.
2 Technical conditions
2.1 Ensure that the lines and auxiliary equipment are in good condition during maintenance
2.2 Periodically testing the arrester
2.3 Periodically inspect the line
2.4 Ensure reliable power supply of the line 5. Duration requirements:
Maintenance of 10KV 584 lines from 2017 to 2019 VI. Respond to matters needing attention:
1. The seller can go to the buyer's site to understand the actual conditions of the line and make a quotation.
2. The name of the respondent file shall be marked with the full name of the respondent and the name of the respondent.
3. The technical part, business part and quotation of the answering documents must be sealed and stamped with the company's official seal, respectively. Failure to affix official seals is considered invalid.
4. Before the contracting unit signs a contract with the buyer, it must pay a performance bond of 5% of the total contract price.
5. This purchase will be reported once for three years and the three-year contract will be signed separately.
3, file quote format:
No.
project name
Every year (ten thousand yuan)
Three years (ten thousand yuan)
Note
1
10KV 584 Distribution Line and Auxiliary Equipment Maintenance
Note: Quotation Price Quotation Seven, Time and place for quotation:
1. The supplier may submit the answer file by mail or on-site by the deadline of 9:00 on November 23, 2016.
2. Quote opening time: 9:00 am on November 23, 2016.
Contact: Zhang Jie
Mobile:
phone
fax
E-mail:
In order to ensure that you can bid smoothly, please consult the bidding agency or the tenderer for detailed requirements for bidding before bidding or purchasing the bidding documents. The specific requirements and project conditions shall be interpreted by the bidding agency or the tenderee.
Different Connector Pigtail
Divide an optical jumper into two to become two optical pigtails.
The optical jumper refers to the optical connection line with the optical fiber movable connector installed at both ends of the optical fiber or optical cable. It is usually used for fiber patching or switching in distribution equipment or between optical equipment, and the length is usually no more than 10 meters.
It is a popular and common saying in the industry that when the connecting wire is an optical cable (indoor optical cable), it is called an optical fiber jumper, and when the connecting wire is an optical fiber, it is called an optical fiber jumper.
In mobile communications, coaxial cable jumpers have special product standards, while optical jumpers are different. Optical jumpers do not have special product standards. Because the attenuation of optical fibers is very small, and the length of optical jumpers is not long, the optical fiber attenuation is negligible. Therefore, the optical fiber movable connector standard is also used as the optical patch cord standard in practice. Some content of the optical fiber movable connector is different from the optical patch cord. However, in the long run, the industry has already considered the optical fiber movable connector standard That is, it is the standard for optical patch cords.
Fiber Connectivity,Lc Pigtail,Fc Pigtail,Sc Pigtail,Fiber Optic Pigtail,Communication Devices,E2000 Pigtail
Shenzhen GL-COM Technology CO.,LTD. , https://www.szglcom.com