The plaintiff broke through 2,000 people in Foshan Lighting or was claimed to have exceeded 200 million yuan

Foshan Lighting recently announced that the Guangzhou Intermediate People's Court has filed a case against 515 people (folk) v. Foshan Lighting's “Securities Disputes Liability Disputes” civil lawsuit. The amount of claims for 515 civil suits was 73.428 million yuan and 81.89 million Hong Kong dollars (about 64.66 million yuan). Some lawyers said that the total number of plaintiffs in the case may eventually exceed 2,000, and the amount of claims may exceed 200 million yuan. It is expected to become the second largest case of civil compensation for Chinese securities after the Eastern Electronics case.

On March 7, 2013, Foshan Lighting, which is known as “cash cow”, announced that it had received the administrative penalty decision from the Guangdong Regulatory Bureau of the China Securities Regulatory Commission. Due to the company’s information disclosure violations, Foshan Lighting, Chairman Zhong Xincai and six others Responsible executives were punished with administrative penalties such as fines and warnings. According to the Securities Law and the judicial interpretation of the Supreme Court, a listed company shall be liable for civil liability for damages caused by false statements.

Li Yu, a lawyer from Zhejiang Yufeng Law Firm, told reporters that he has acted in three batches to sue Foshan Lighting for more than four million yuan. He is currently awaiting court notice, and the fourth batch of shareholders are going to file a lawsuit in October. Li Jian said that it had bought and sold between July 15, 2010 and July 6, 2012, and sold or continued to hold Foshan Lighting A shares or Guangdong Lighting B shares after July 6, 2012, and existed. A shareholder who loses or presumes a loss can sue a claim.

“In just over 6 months, Foshan Lighting’s 515 shareholders’ claims exceeded 70 million yuan. At present, there are still about one and a half years from the expiration of the statute of limitations. Foshan Lighting’s shareholders are about 150,000, considering that there are many investors who are eligible for the claim. Waiting and not suing, preliminary estimates, the total number of plaintiffs in the two-year Foshan lighting case may exceed 2,000, and the total amount of claims may exceed 200 million yuan, which is expected to become the second largest case of civil compensation for Chinese securities after the Eastern Electronics case." Li Jian said.

3D printing on the pen machine is mainly used in 3 d printing pen, is made from a special custom Dc Gear Motor, mainly used in 3 d printing pen, pen 3 d printing machine has been updated three generations according to the requirements of product.


3D Printing Motor product introduction:

The 3D Printing Motor is based on the deceleration Motor, coupled with supporting gears and ball bearings.The role of the gear reducer is to provide lower speed and greater torque.At the same time, gear box different deceleration ratio can provide different speed and torque.It's mostly rolling.

3D Printing Motor

     3D Printing Motor3D Printing Motor




Features: 3D Printing Motor, small size, large torque, low noise, durable, low energy consumption, customized power design, convenient installation and maintenance;

Simplify design and save space.


Features: usually used financial equipment, office equipment, electronic locks, wireless charger, remote control toys, precision instruments and meters, automobile industry, medical equipment, consumer electronics, household appliances, electric glass doors and Windows, etc., wide application range


Method of use: the best stable in horizontal plane, installed on the 3D Printing Motor output shaft parts, cannot use a hammer to knock, knock prone to press into the 3D Printing Motor drive, may cause damage to internal components, and cannot be used in the case of blocked.

3D Printing   3D Printing



Operating temperature range:

3D Printing Motor should be used at a temperature of -10~60℃.

The figures stated in the catalog specifications are based on use at  ordinary room temperature catalog specifications re based on use at ordinary room temperature  (approximately20~25℃.

If a 3D Printing Motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.


Storage temperature range:

3D Printing Motor should be stored ta a temperature of -15~65℃.

In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.


Service life:

The longevity of 3D Printing Motor is greatly affected by the load conditions , the mode of operation,the environment of use ,etc.Therefore,it is necessary to check the conditions under which the product will actually be used .The following conditions will have a negative effect on longevity.Please consult with us should any of them apply.

●Use with a load that exceeds the rated torque

●Frequent starting

●Momentary reversals of turning direction

●Impact loads

●Long-term continuous operation

●Forced turning using the output shaft

●Use in which the permitted overhang load or the permitted thrust load is exceeded

●A pulse drive ,e.g.,a short break,counter electromotive force,PWM control

●Use of a voltage that is nonstandard as regards the rated voltage

●Use outside the prescribed temperature or relative-humidity range,or in a special environment.

●Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.


when it come to volume production,we're a major player as well .each month,we rurn out  600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you Looking forward to your inquiry. Welcome to our factory.

3D Printing Motor

3D Printing Motor

3D Printing Motor,3D Printing Gear Motor,3D Printing Pen Motor,3D Printing Spindle Motor

Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com