The LED standard cannot be "just in time" and needs to "advance with the times"

According to statistics, the LED standard under the jurisdiction of the China Lighting Standardization Technical Committee has issued 11 LED national standards and 2 industry standards; 6 LED national standards and 2 industry standards are currently being formulated; LED-related national standards are involved. 25 Items and industry standards. However, how to make these standards play their due role requires the industry's further efforts.

Let LED national standards "advance with the times"

It has to be admitted that China's LED industry is still in the primary development stage. About 80% of its products are concentrated in landscape lighting, traffic signals and other application markets, and the general lighting market is still being promoted. As of the end of 2011, China had a total of more than 8,000 LED companies, of which only 140 had annual output value of 100 million yuan. However, none of the 140 companies had annual sales of more than 1 billion yuan, and only a few of them exceeded 500 million yuan. It can be seen that the scale and standardization and promotion of China's LED industry are still heavy.

The consequence of a low threshold is that companies are mixed, and unorderly development will inevitably lead to chaos in the industry. Unstandard industry development is caused by disorderly competition in the market, but at the same time it also needs the support and guidance of the “invisible hand” of the national macro-control, because the promotion of the LED industry, such as the excessive impact on the employment of the traditional lighting industry, is Conflicts between local policies, industry standards, testing and certification mechanisms are "fighting" with each other. National standards, industry standards, local standards and corporate standards are not uniform, and even local protectionism, etc. It may not be realistic for companies to mediate.

In fact, if the LED industry wants to get large-scale promotion and healthy development, it must first establish a set of standards in line with national conditions, including national standards, technical standards, testing standards, certification standards, and so on. “No rules become a rule” This truth. As the LED industry lacks the national standards recognized by the industry, the detection system has not yet been established. This not only causes the cohabitation of companies in the LED industry, but also results in the unequal quality of LED products, and the emergence of many unfair competition phenomena such as false advertising, resulting in the current The disorderly competition in the LED industry has intensified. Some companies report that the parameters detected by the two test equipments are inconsistent. The reason is that these two test equipments do not use one standard. The result of the inconsistent standards is that the product quality and performance are different.

The development of China's LED industry must rely on the guidance of national standards such as product standards and energy efficiency standards. The introduction and implementation of national standards and testing systems will not only contribute to the improvement of the quality and service life of LED products, but also help LED companies with heavy quality and heavy brands to increase their market share, and are more conducive to LED products with technological strength and pipeline strength. The enterprise is bigger and stronger and the technology upgrade of the LED industry.

Verification standard units optimistic about LED lighting

International validation standard unit UL is optimistic about the application of LED lighting. UL's Asian regional development manager Chen Lijun pointed out on December 11th that Taiwan LED factory has good technology, and the special lighting with high safety threshold will be the new blue ocean for LED factories in Taiwan.

It is reported that Taiwan's current LED lighting factory that has undergone special lighting experiment certification has Ai Feisen and Qi Hao who have invested in Jingdian. LED by the backlight into the lighting era, oversupply, the price of all the way down the competitive fact that many LED factories profitability difficulties, however, Chen Lijun said that LED lighting applications is not only the general people's livelihood lighting, LED characteristics of the application of lighting, its market is quite diverse However, how to profit from in-depth operations and choose the market is the key.

Looking at the technical advantages of Taiwan's LED factories, Chen Lijun believes that it is a good choice to develop special lighting with high safety thresholds to earn certain profits, but also because the safety threshold is high and the product testing time is at least 6,000 hours waiting. In the period, this first threshold made many companies retreat. He believes that as long as business owners insist on choosing a long-term and stable profit model, special lighting will be a good choice for LED manufacturers in Taiwan.

UL believes that the most prominent feature of special lighting applications is the use of the environment is usually in the public domain, and the lighting time is long, its high security verification standards, terminal applications include, emergency lighting, stage lighting, underwater lights, track lights, LED transposition groups, The path indicates lighting, swimming pool, surface temperature limit, medical lighting, etc. At present, LED lighting products that have internationally recognized standards for lighting in medical facilities include surgical lighting, yellow light, infrared heating lamp, beauty lighting, and laser.